2 wires alarm smoke detector sensor manufacturers
Description:
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber.
This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication.
They flash every six seconds indicating that power is applied and the detector is working properly.
The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit.
The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Parameters:
|
Product Name
|
2 wires alarm smoke detector sensor manufacturers
|
|
Model No.
|
AS-SD102
|
|
Type
|
Conventional optical
|
|
Operating Voltage
|
9-28VDC
|
|
Standby Current
|
≤60uA
|
|
Alarm Current
|
≤30mA
|
|
Indicator
|
Yes
|
|
Wiring
|
2 wires
|
|
Standard
|
EN54-7
|
|
Matched Host
|
AS-BFP, AS-AFP series panel
|
|
Application
|
Office, factory, warehouse, apartment, hotel, bank, supermarket, shopping mall, school, hospital etc.
|
Related Models:
* AS-SHD109: Smoke and heat multi detector
* AS-SD202: Conventional smoke detector with relay output
* AS-HD105: Conventional heat detector
* AS-CGD501: Conventional Combusible gas detector
* AS-IRBD: Infrared reflective beam smoke detector
* AS-E301-UV: Explosion proof ultrovialet flame detector
* AS-SSD101: 9V Battery operated smoke detector
About Us:
ANSORL LTD is a building automatic control system and fire alarm system solution provider. Over the past years, We have always been dedicated to serving the diverse needs of our customers. Although we started out as a tiny engineering and manufacturing company in China and have grown into a global player in the international safety market, Ansorl continues to work hard to earn your trust and retain your confidence in our product line.
We focuse on providing advanced buidling automatic control system and fire alarm / fire protection system. Ansorl works harder to tailor our solutions to meet your needs.
Ansorl is an ISO 9001:2000 certified manufacturer with number of testing facilities. We are also planning to expand our manufacturing and testing facilities in China to ensure that our products and manufacturing practices continue to meet the highest standards.
We invite you to get to know Ansorl better. Experience the best fire alam technology and solution. We are convinced that you will find Ansorl superior to any other detector company in China. You'll see it in our facilities, in our people, and in the products that Ansorl makes. It's our uncommon commitment to excellence and quality, and to the automation and productivity of our customers.
Product Lines:
* Conventional and Addressable fire control panel
* Smoke, heat, gas, flame, beam detector
* Manual call point and pull station
* Audio/visual alarm, strobe horn
* Standalone battery operated fire alarm detectors
* Explosion-proof and weather-proof fire alarm devices
* FM200/CO2 gas extinguishing control system
* Other fire safety products
Our Service:
* Prompt Response.
* Standard Quality Control System.
* Sample & Customized Order Can Be Supported.
* Independant R&D / Manufacturing / Customer Service / Marketing Dept.
* Direct Control On Materials, Production Status, Quality Checking.
* Fast Delivery Time for Standard Products.
* State-of-the-art Technology and Models.
* Waranty Guarrentee.
Inquiry Now !
Jean L.
we chat : ansorfire
sky pe: firesafety_18
9 to 28v optical smoke sensor detector
Description:
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber.
This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication.
They flash every six seconds indicating that power is applied and the detector is working properly.
The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit.
The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Parameters:
|
Product Name
|
9 to 28v optical smoke sensor detector
|
|
Model No.
|
AS-SD102
|
|
Type
|
Conventional optical
|
|
Operating Voltage
|
9-28VDC
|
|
Standby Current
|
≤60uA
|
|
Alarm Current
|
≤30mA
|
|
Indicator
|
Yes
|
|
Wiring
|
2 wires
|
|
Standard
|
EN54-7
|
|
Matched Host
|
AS-BFP, AS-AFP series panel
|
|
Application
|
Office, factory, warehouse, apartment, hotel, bank, supermarket, shopping mall, school, hospital etc.
|
Related Models:
* AS-SHD109: Smoke and heat multi detector
* AS-SD202: Conventional smoke detector with relay output
* AS-HD105: Conventional heat detector
* AS-CGD501: Conventional Combusible gas detector
* AS-IRBD: Infrared reflective beam smoke detector
* AS-E301-UV: Explosion proof ultrovialet flame detector
* AS-SSD101: 9V Battery operated smoke detector
About Us:
ANSORL LTD is a building automatic control system and fire alarm system solution provider. Over the past years, We have always been dedicated to serving the diverse needs of our customers. Although we started out as a tiny engineering and manufacturing company in China and have grown into a global player in the international safety market, Ansorl continues to work hard to earn your trust and retain your confidence in our product line.
We focuse on providing advanced buidling automatic control system and fire alarm / fire protection system. Ansorl works harder to tailor our solutions to meet your needs.
Ansorl is an ISO 9001:2000 certified manufacturer with number of testing facilities. We are also planning to expand our manufacturing and testing facilities in China to ensure that our products and manufacturing practices continue to meet the highest standards.
We invite you to get to know Ansorl better. Experience the best fire alam technology and solution. We are convinced that you will find Ansorl superior to any other detector company in China. You'll see it in our facilities, in our people, and in the products that Ansorl makes. It's our uncommon commitment to excellence and quality, and to the automation and productivity of our customers.
Product Lines:
* Conventional and Addressable fire control panel
* Smoke, heat, gas, flame, beam detector
* Manual call point and pull station
* Audio/visual alarm, strobe horn
* Standalone battery operated fire alarm detectors
* Explosion-proof and weather-proof fire alarm devices
* FM200/CO2 gas extinguishing control system
* Other fire safety products
Our Service:
* Prompt Response.
* Standard Quality Control System.
* Sample & Customized Order Can Be Supported.
* Independant R&D / Manufacturing / Customer Service / Marketing Dept.
* Direct Control On Materials, Production Status, Quality Checking.
* Fast Delivery Time for Standard Products.
* State-of-the-art Technology and Models.
* Waranty Guarrentee.
Inquiry Now !
Jean L.
we chat : ansorfire
sky pe: firesafety_18
